Start with the connector part number and conductor size when buying electrical terminal crimping pliers. Ask the terminal maker for the approved crimp profile, strip length and tool specification, then match those requirements to a sample. The terminal style and wire range should both appear on the purchase specification.

Bare terminals, pre-insulated terminals and connector types
| Connector or cable | What the buyer should verify |
|---|---|
| Bare or non-insulated terminals | Identify open- or closed-barrel construction and match the crimp die to the terminal series. |
| Pre-insulated terminals | Use the terminal maker’s specified cavity and check the insulation sleeve and finished crimp. |
| OT / UT cold-press terminals | OT commonly refers to ring and UT to fork in supplier catalogues. Use the terminal drawing, barrel and conductor size to confirm the order. |
| RJ45 / RJ12 modular network plugs | Specify the plug and cable construction. RJ45 8P and RJ12 6P use modular crimp tooling. Check the exact pin positions and pass-through design. For a multi-port 8P/6P/4P tool, specify each modular plug. |
| Carbon-fiber heating cable or floor-heating cable | Ask the heating system supplier for the specified splice, sleeve and crimping tool. |
Match the hand crimping tool to the terminal barrel
Open-barrel terminals may have separate conductor and insulation sections. Closed-barrel and pre-insulated terminal families may call for different dies. Compare marked-jaw wire stripper crimper pliers when you need stripping and crimping in one hand tool. For a retail programme that needs a hanging pack, review the blister-packed terminal crimping pliers and confirm the required cavity on your approved sample.
Approve the first sample before a bulk order
- Send the terminal drawing, connector part number, conductor sizes and wire construction.
- Confirm the jaw profile, intended strip length and sample acceptance criteria with the connector supplier.
- Examine the finished sample for cut strands, conductor placement and insulation damage. Ask for crimp-height or pull-force checks where the terminal specification calls for them.
- For a 10-in-1 or cold pressing tool set, list the tools, dies and terminals you want included and confirm the supplied contents on the quotation.
Technical reference from TE Connectivity on terminal and splice crimping
Frequently asked questions
Can one die crimp all bare and pre-insulated terminals?
Match the crimp cavity to the terminal family, wire and terminal manufacturer’s tooling specification.
Can I specify a tool for both RJ45 and RJ12 connectors?
Provide both plug part numbers, cable construction and pass-through requirements so a matching modular crimper can be specified.
Related Products
Blister-Pack Terminal Crimping Pliers | OEM WholesaleIndividual hanging packs for retail assortment planning.
Marked-Jaw Wire Stripper Crimper Pliers | OEM SupplierMarked jaw positions and two-tone grip choices.
190 mm Wire Stripper, Crimper and Cutter | OEM Wholesale190 mm combination tool with a marked cutter.
OEM Metric Multifunction Wire Stripper PliersMetric-format stripping for renovation and electrical tool ranges.
OEM AWG Wire Stripper Crimper and Cutter PliersAWG-marked option for stripping, crimping and cutting.
Request an OEM quotation
Send your wire sizes, terminal drawings, target quantity and packing requirements to confirm the appropriate model and quotation.
