A 120mm light-up scooter wheel set is a practical sourcing route for selected three-wheel scooters that use two large front wheels and a smaller rear wheel. A 120mm front plus 80mm rear arrangement appears in the replacement market, but it is not a universal standard. Each wheel position must be recorded separately because width, axle, hub, bearing, spacer and brake interface can differ.
This page helps importers and after-market brands build one coordinated retail kit without describing two sizes as interchangeable. The front wheels can be quoted from the shown 120 × 24mm reference, while the 80mm rear wheel is approved from the customer drawing or original sample.
120mm Front and 80mm Rear Wheel Set Matrix
| Position | Common enquiry reference | Buyer data needed |
|---|---|---|
| Front left | 120 × 24mm light-up PU wheel | Fork clearance, bearing, spacer, axle, offset and light effect. |
| Front right | 120 × 24mm matching light-up PU wheel | Whether the generator or assembly has a required orientation. |
| Rear | 80mm replacement wheel, lighting optional | Width, hub, axle, brake/mudguard clearance and spacer. |
| Bearings | 608 family is common in scooter/skate wheels | Shield/seal, precision requirement, bore and whether fitted or loose. |
| PU hardness | 82A/85A for selected scooter programmes; other targets reviewed | Surface, comfort/grip priority and agreed tolerance by size. |
| Retail pack | Three-wheel kit or buyer-defined replacement set | Pieces, spare hardware, instructions, barcode, warning and destination language. |
Why a 120mm Light-Up Scooter Wheel Set Needs Separate Front and Rear Specifications
Combining the wheels into one retail box does not make their interfaces identical. Front wheels may run on a fork and spacer system, while the rear wheel can sit near a brake, mudguard or different axle shoulder. A correct kit therefore has a bill of materials rather than a single line reading “scooter wheels”.
The light effect can also differ. Some buyers want all positions to illuminate; others select two luminous front wheels and a non-lighting rear wheel. State this clearly on the purchase order and retail listing.
OEM Wheel-Kit Packaging
- One set code linked to component SKUs and revision-controlled drawings.
- Separate protection so bearings and wheel faces do not rub in transit.
- Barcode, compatible-model wording and included-hardware list approved by the buyer.
- Colour and light-effect identification visible without opening mixed cartons.
- Export carton marks arranged for distributor receiving and replenishment.
Sample Approval and Repeat-Order Control
For a mixed 120mm/80mm scooter wheel kit, the approved sample should record more than the wheel colour. A useful control sheet identifies diameter, width, profile, hub or bearing seat, bearing and spacer, axle interface, Shore A hardness, print, light function, set count and packaging. This makes later purchase orders easier to compare and reduces mixed-SKU or fit disputes.
| Inspection point | How it is controlled | Why it protects the buyer |
|---|---|---|
| Dimensions | Drawing, tolerances and sample measurement | Reduces frame, fork, spacer and axle mismatch. |
| PU hardness | Shore A method and agreed tolerance | Keeps ride and rolling feel more consistent between lots. |
| Light function | Spin test and visual reference under agreed conditions | Confirms the generator and LEDs operate before packing. |
| Bearing fit | Specified bearing, spacer and rotation check | Avoids loose seats, binding or incomplete sets. |
| Appearance | Approved colour, artwork and moulding sample | Protects the private-label range from avoidable variation. |
| Packing | Pack count, barcode, labels and carton marks | Supports receiving, resale and replenishment accuracy. |
If rebound or abrasion is a purchase criterion, state the test method, specimen, conditioning and acceptance target in the enquiry. Hardness alone does not prove rebound, service life or abrasion performance.
How the Programme Supports Distributor Margin
A complete replacement set can raise average order value and simplify purchasing for customers who do not want to source the front and rear components from different suppliers. The commercial advantage comes from selling a clearly identified replacement rather than an anonymous wheel. A controlled size and fit statement reduces avoidable returns, while coordinated colour, logo and retail packing help a distributor build a recognisable range.
- Fewer compatibility disputes: dimensions and included components are confirmed before the sales listing is written.
- Better assortment planning: each diameter, colour and pack count has its own SKU instead of being mixed under one vague item.
- Stronger repeat orders: an approved sample and inspection sheet become the reference for replenishment.
- Private-label value: authorised artwork, barcode labels and export cartons can be reviewed with the volume programme.
120mm + 80mm Scooter Wheel Set FAQ
Is the rear wheel always 80mm?
No. 80mm is one common replacement brief. Measure the actual rear wheel and installation before ordering.
Can the two front wheels light while the rear wheel does not?
Yes, if the bill of materials, sample and packaging clearly identify that configuration.
Are axle bolts and spacers included?
Only when listed in the quotation. Send the original hardware or a drawing so compatible parts can be reviewed.
Can a kit carry our compatibility list?
Yes, but the buyer should validate each named scooter model and approve all wording before printing.
Compare Related Wheel Options
Compare the complete PU skate and scooter wheel range for different applications and fit requirements.
- 120mm LED scooter front wheels
- 100mm light-up wheels with 608 bearings
- Custom light-up scooter wheel programme
Before requesting samples, use the 100–125mm size and fit guide and the battery-free LED and 608 bearing assembly guide.
For a focused comparison, browse the light-up scooter wheel collection.
Build a 120mm + 80mm Replacement Kit
Send a wheel-position map, original front and rear samples, included-hardware list, pack quantity and expected order volume. We will prepare a comparable set specification.
Send Your Drawing and Request a Quote
Email: [email protected]
WeChat / WhatsApp: +86 19053267096
