Qingdao Gleam Hardwares is a 625ZZ bearing supplier for door and window hardware producers, compact pulley manufacturers and component distributors. This page covers the bare, double-metal-shielded bearing core with a nominal 5 × 16 × 5 mm envelope. Send your material, lubrication, fit and quantity requirements for a bulk quotation. A finished plastic or metal pulley is specified and quoted separately.
625ZZ Bearing for Sliding Door Rollers and Pulley Assemblies
As a 625ZZ bearing supplier for pulley assemblies, we support importers, door and window hardware producers, distributors and private-label brands. Buyers should identify whether the RFQ covers the 625ZZ pulley core alone or a finished overmolded or machined roller assembly.

625ZZ Bearing Specification Review
| Specification point | Purchasing requirement |
|---|---|
| Product type | Miniature single-row deep groove ball bearing |
| Reference model | 625ZZ / complete suffix to be confirmed |
| Closure | Metal shields on both sides for the ZZ version |
| Nominal catalogue size | 5 × 16 × 5 mm; verify against the drawing and sample |
| Finished component | Bare 625ZZ bearing core on this page; complete pulley assemblies quoted from a separate finished-wheel specification |
| Fit | Shaft and housing or overmolded wheel fit confirmed by drawing |
| Material review | Carbon steel, chrome steel or stainless steel can be evaluated; final grade and suitability must be confirmed against the drawing, environment and approved sample. |
| Wholesale MOQ | Confirmed after the pulley core or finished roller assembly, material, grease, labeling, packing and expected order volume are defined. |
| Packaging | Neutral or customized labeling subject to order review. |
625ZZ Catalogue Reference and Specification Options
This technical card uses published manufacturer-catalogue data for preliminary comparison. The bearing rating is not the load capacity of a completed plastic or metal pulley; the wheel profile, fit, axle, bracket and track must also be evaluated.
| Reference item | 625 / 625ZZ catalogue reference | Order control |
|---|---|---|
| Nominal size | 5 × 16 × 5 mm | Confirm full suffix and pulley-core fit |
| Basic dynamic load C | 1.73 kN | NSK published reference; internal design can change the rating |
| Basic static load C0 | 0.670 kN | Use the approved supplier data sheet for final calculation |
| Grease limiting speed | 36,000 rpm | Open/ZZ catalogue comparison; seal, grease, fit, load and temperature can reduce speed |
| Oil limiting speed | 43,000 rpm | Open-bearing catalogue comparison, not a 625ZZ pulley guarantee |
Reference: NSK Miniature Ball Bearings catalogue. Published values differ between manufacturers even when nominal dimensions match. Final ratings follow the approved 625ZZ construction, lubricant, clearance, fit and project data sheet.
625ZZ Configuration Matrix
| Selection item | Typical sourcing options | What the RFQ should state |
|---|---|---|
| Material | GCr15 / 100Cr6 / SAE 52100 / SUJ2 equivalent bearing steel; stainless option by project | Exact grade, corrosion environment and document requirement |
| Precision | ABEC 1 / P0, ABEC 3 / P6, ABEC 5 / P5; higher grade by project | Required tolerance class and receiving checks |
| Noise and vibration | Standard or low-noise/low-vibration grade | Measurement method and agreed limit; ABEC alone is not a noise grade |
| Radial clearance | C2, CN/C0, C3 or manufacturer-specific miniature range | Shaft fit, overmoulding or housing fit, speed and temperature |
| Closure | Open, Z, ZZ/2Z, RS, 2RS or low-friction seal | Dust/moisture exposure, torque and speed priority |
| Lubrication | General-purpose, low-temperature, high-temperature/high-speed, low-torque or low-noise grease | Temperature, duty cycle, storage and pulley rotation requirement |
| Packaging | Tube, tray, individual box, bulk carton, neutral or OEM labels | Pieces per pack/carton, batch ID, barcode and carton mark |
Samples, Technical Data and Quantity Comparison
Free standard samples can be arranged for size, closure and pulley-fit review. Send the bearing code or 5 × 16 × 5 mm requirement, pulley-core drawing or sample, closure, quantity and packing target. Sample combination, availability and shipping arrangement are confirmed before dispatch.
| Quotation level | Use | Commercial check |
|---|---|---|
| 2,000 pcs | Trial order or pulley validation | Core fit, closure and approved sample |
| 10,000 pcs | Regular bulk programme | Repeat-order specification and packing |
| 50,000 pcs+ | Volume or OEM-label programme | Forecast, lot, marking, carton and trade term |
These are quotation comparison points, not a universal MOQ. Available dimensional drawing, specification sheet and tolerance information can be supplied on request after the configuration is confirmed.
Request 625ZZ Samples, Technical Data and 2K / 10K / 50K Pricing
5x16x5mm Bearing for Nylon Pulley Core
The nominal 625ZZ catalogue size is commonly referenced as 5 × 16 × 5 mm. For a 5x16x5mm bearing for nylon pulley core project, the bearing dimensions do not define the finished wheel outside diameter, width, groove or overmolding fit. Submit both the pulley core specification and the complete roller assembly drawing.
625ZZ Is Not the Finished Pulley Size
A common purchasing error is to assume that the bearing outside diameter is the same as the completed door roller diameter. A 625ZZ core can be integrated into different housings or wheels. When requesting a 625ZZ sliding door roller bearing or a 625ZZ pulley bearing, provide both the bearing size and the finished roller dimensions.
Where This 625ZZ Pulley Core Is Evaluated
- 625ZZ bearing for sliding door rollers and compact window pulley assemblies
- 625ZZ shielded miniature bearing for cabinet rollers, furniture and wardrobe hardware
- Small guide wheels and hardware mechanisms
- Custom nylon, POM or metal roller assemblies developed from a drawing
Suitability depends on the track, installation, load, contamination and operating conditions. Sample approval should be based on the customer’s real assembly rather than the model number alone.
B2B Value for Importers and Hardware Brands
Clear separation between the bearing core and finished pulley helps prevent fitment complaints, repeated sampling and mislabeled inventory. We can review the core, roller drawing, label and packaging together so distributors can build a more reliable replacement-parts range and brands can maintain consistent specifications between repeat orders.
625ZZ vs 626ZZ
These model numbers are not interchangeable. Confirm the bore, outside diameter, width, closure and finished wheel specification before changing from a 625ZZ to a 626ZZ or another compact bearing. See our door roller bearing comparison guide.
Material and Lubrication for Bulk Orders
Specify the ring and ball material, operating temperature, speed, load and contamination when comparing 625ZZ quotations. Carbon-steel, chrome-steel and stainless constructions have different cost and application limits. For moisture-exposed pulleys, define the material grade, closure and corrosion acceptance criteria with the supplier.
Bulk packing and samples: include the initial order quantity, expected repeat volume, tube or individual packing preference and label requirements. Free samples are available; the sample configuration and shipping arrangements are confirmed with your enquiry.
Plastic Tube and Box Packing for Bulk Bearing Orders
Specify the bearing code, pieces per tube or inner box, label and export packing requirements with your quantity list. The photos below show available packing formats for discussion; the ordered model and pack count are confirmed in the quotation.


For repeat orders, agree the full code, material and closure, inner-pack quantity, batch identification and carton label with the approved sample.
FAQ
Can you quote a 625ZZ bearing for overmolded wheels wholesale program?
Yes. Send the pulley core fit, finished wheel material, outside diameter, width, groove, quantity and packaging. We will evaluate the complete roller assembly and confirm the project-specific wholesale MOQ.
Can you supply a completed 625ZZ plastic pulley wheel?
It can be evaluated from the finished wheel drawing or sample. Material, outside diameter, width and groove must be confirmed independently from the bearing code.
What should I send for a faster quotation?
Send the full code, verified dimensions, application photo or drawing, quantity, destination market and packaging requirement.
Request a 625ZZ Supplier Quote
Send your 625ZZ bearing or finished pulley specification. We will check the code, dimensions, application and packaging before quoting.





