Bearings for Sliding Doors and Windows: Select the Complete Roller
Qingdao Gleam Hardwares supplies bearings for sliding doors and windows with plastic or elastomer outer-wheel options for hardware manufacturers, importers and repair programmes. This range page helps buyers compare bearing codes and roller constructions before specifying a finished component.
Start with the rail cross-section and mounting space. The bearing code describes the internal bearing; the finished wheel needs its own outside diameter, width, groove and hub measurements.
| Specification | Selection details |
|---|---|
| Internal bearing options | 606ZZ, 608ZZ, 625ZZ, 626ZZ and 627ZZ; confirm the exact code and closure. |
| Outer-wheel materials | Nylon, POM, polyurethane or rubber, selected for track contact and operating conditions. |
| Profile options | Flat, U-groove, V-groove, concave or flanged designs reviewed against the rail. |
| Finished dimensions | Outside diameter, wheel width, groove width/depth, hub projection and bore fit. |
| Mounting | Axle or bolt diameter, shoulder, spacer and available housing clearance. |
| Operating requirements | Door or sash weight, number and position of rollers, travel frequency and environment. |
| Quality review | Dimensional fit, bearing retention, wheel concentricity and rolling operation. |
| OEM supply | Drawing or measured sample, expected quantity, packing and identification requirements. |
Choose the Outer Wheel for the Track
A nylon or POM wheel and a PU- or rubber-covered wheel have different contact characteristics. Compare movement, noise and wear on the same rail with the same installation. Groove depth and edge clearance matter alongside the material choice.
For replacement hardware, photograph the wheel and rail together and send a worn part plus any available drawing. If the original is heavily worn, include an unworn mating component or a known installation dimension so the replacement is not based solely on a damaged surface.
Make Repeat Supply Easier
Keep the internal bearing code and finished roller drawing under one part number. This helps your warehouse and assembly team avoid mixing wheels that look similar but differ in groove depth or hub projection. Packaging labels can identify the agreed model and batch.
Send the inspection points you use at receiving. Dimensional checks, bearing retention and sample rolling tests can be defined before the bulk order. The final quotation and approved drawing establish the supplied material and performance requirements.
Frequently Asked Questions
Can 608ZZ and 626ZZ be exchanged?
They are different bearing codes and must be checked against the shaft and finished wheel design. Do not choose a replacement solely from the outside appearance of the roller.
Do you need a custom moulded wheel?
For a drawing-led project with a new outside profile or coating, use our custom plastic bearing roller wheel page to prepare the development enquiry.
What if the application only needs a bare bearing?
Compare 625ZZ miniature bearings or 608ZZ miniature bearings, and browse the bearing and roller category for related components.
Request a Product-Matched Quotation
Send your drawing or product photo, required dimensions, operating conditions and expected quantity. We will review the specification and provide quotation details for your project.
Email: [email protected]
WeChat / WhatsApp: +86 19053267096
