Standard glass door handle sizes are usually described with more than one number: overall length, center-to-center (C-to-C) mounting distance, tube diameter or section, projection and the glass interface. A buyer who sends only “600 mm handle” may receive the wrong drilling pattern even when the visible length looks correct.
This B2B size guide organizes common production options for importers, distributors, glass-door fabricators and project procurement teams. The figures below are selection references—not universal dimensions for every door. Confirm the final handle drawing, fixing kit and prepared glass before production or installation.
Glass Door Handle Size Terms
| Term | What it measures | Why buyers must state it |
|---|---|---|
| Overall length | End-to-end visible length of the pull | Controls visual scale but does not identify glass-hole spacing |
| C-to-C / hole pitch | Distance between mounting-hole centers | Must match the approved drilling layout |
| Tube diameter / section | Round diameter or square/rectangular section | Defines the grip and construction, not the glass-hole diameter |
| Projection | Distance the handle extends from the door face | Affects hand clearance and collision with frames or adjacent panels |
| Glass interface | Glass thickness, hole diameter, sleeves, washers and bolt length | Determines whether the fixing set matches the prepared door |
For a measuring method and edge-to-edge cross-check, use the existing C-to-C hole-spacing guide. This article focuses on size selection and model ranges so the two pages do not compete for the same search intent.
Common Glass Door Pull Handle Sizes
| Use | Common production options | Selection note |
|---|---|---|
| Compact shower handle | 6 in / 152.4 mm or 8 in / 203.2 mm C-to-C | Confirm enclosure overlap, projection and fixing kit |
| Commercial pull | 300, 400, 450 or 600 mm C-to-C | Match the overall length and tube section to the selected model |
| Long architectural pull | 600, 800, 1000 or 1200 mm overall length families | Longer visible length does not establish door capacity |
| Round tube | Ø19, Ø25 or Ø32 mm | Specify finish, grade and wall/construction requirements separately |
| Square tube | 19 × 19 or 25 × 25 mm | Coordinate corner form, posts and architectural style |
| Glass thickness | 8, 10 or 12 mm | Use the corresponding sleeves, collars, washers and fastener length |
Model Chart: Overall Length and C-to-C
| Model | Overall length A | C-to-C B | Printed section D |
|---|---|---|---|
| GLH-2601 | 450 or 600 mm | 300 or 400 mm | 15 × 30 mm |
| GLH-2602 | 450 or 600 mm | 300 or 400 mm | 10 × 40 mm |
| GLH-2603 | 450, 600 or 800 mm | 300, 400 or 400 mm | 19 × 38 mm; 25 × 45 mm on the 800/400 option |
| GLH-2604 | 450, 600 or 800 mm | 300, 400 or 500 mm | 20 × 40 mm |
Read each row as a model-specific combination. Do not mix the A, B and D values from different rows without a new drawing review. For 1000 and 1200 mm long pulls, 1000/840 and 1200/1040 mm overall/C-to-C combinations are available for project review.
Choose the Right Product Page by Search Intent
- 600, 800 or 1000 mm straight pull: use the multi-size glass door pull handle series.
- 1200 mm long architectural pull: use the 1200mm project handle page.
- Commercial rounded loop: use the U shaped glass door pull handle.
- Offset hand clearance: use the offset cranked glass door pull handle.
- Existing prepared holes: use the custom hole-pitch handle.
- Compact bathroom enclosure: use the frameless shower handle.
This separation gives each product page a distinct job and reduces keyword overlap. Browse the complete manufacturer and supplier category for the selection table.
Size Checklist for an OEM Enquiry
- State whether each quoted number is overall length, C-to-C, projection or tube section.
- Attach the door drawing with glass thickness, hole diameter, edge offsets and opening direction.
- Identify material grade, visible finish and the sample or standard used for appearance approval.
- Define a complete set: paired grips, posts, collars, sleeves, washers, bolts and spares.
- List quantity by model and size, individual protection, carton marking and destination.
For assembly steps and installer checks, continue with how to install a glass door pull handle.
Glass Door Handle Size FAQ
What is the standard glass door handle size?
There is no single universal size. Common commercial mounting centers include 300, 400, 450 and 600 mm, while compact shower handles often use 152.4 or 203.2 mm C-to-C. Select by the actual door drawing.
Is a 600 mm handle measured overall or center-to-center?
Either usage can appear in the market. Write the dimension name explicitly. In the shown model chart, 600 mm is overall length and 400 mm is C-to-C.
Can a 1000 mm pull fit existing 840 mm holes?
A 1000/840 mm overall/C-to-C combination is available for review, but fit also depends on hole diameter, glass thickness, posts, sleeves, washers and the approved fixing kit.
Should every size have a separate product page?
No. When the construction and buyer intent are the same, related sizes belong on one strong model-family page with a clear table. Separate pages are useful only when the application or configuration is materially different.
Send a Handle Size Schedule
For a B2B quotation, send overall length, C-to-C, tube section, glass thickness, hole diameter, material, finish, fixing kit, quantities and destination.